Your browser is out of date!

Update your browser to view this website correctly.

Update browser
Be sure to visit us at Booth W4943 at NPE2024 - See you there
Polifil® C
Polifil® RMC
Polifil® T
Polifil® RMT
Polifil® GFPP
Polifil® GFPPCC
Polifil® GFPPCC-WS
Polifil® GFRMPPCC
Polifil® BS
Polifil® RC
Polifil® GFABS
Polifil® GFPC
Polifil® GFN/MRN 6
Polifil® GFN/MRN 6/6
Polifil® Nylon 6
Polifil® Nylon 6/6
Polifil® RP-ABS
Polifil® RP-HDPE
Polifil® RP-HIPS
Polifil® RP-LDPE
Polifil® RP-PP
Polifil® TPO-60D12
Polifil® TPO-60D12UV
Polifil® TPOT-2024UV

Polifil® RP-HDPE

Reprocessed High Density Polyethylene

Polifil® RP-High Density Polyethylene is a moderate stiffness material that retains excellent toughness. HDPE exhibits outstanding chemical resistance and environmental stress crack resistance. Injection molding applications range from small containers and lids to large crates and bins. Low melt flow versions are used for blow molded bottles for...

Learn more
PhysicalASTM/
Method
Polifil®
RP-HDPE
Reinforcement content (%)TPG WI
Specific gravityD 7920.96
Melt flow 230/2.16 (g/10 min)D 12380.1-5*
Water absorption, 24 hours (%)D 570nil
Mold shrinkage – 1/8″ specimen (in/in)D 9550.028
* melt flow may be specified
Mechanical @ 73°FASTM/
Method
Polifil®
RP-HDPE
Tensile strength (psi)D 6383,500
Elongation @ yield (%)D 63812
Elongation @ break (%)D 638>200
Tensile modulus (kpsi)D 638170
Flexural modulus, tangent (kpsi)D 790150
Flexural strength (psi)D 7904,000
Izod impact, notched (ft-lbs/in)D 2561.6
Gardner impact, 1/2″ tup (in-lbs)D 5420>200
Hardness, shore (D-scale)D 141564
ThermalASTM/
Method
Polifil®
RP-HDPE
Deflection temperature, 66psi (°F)D 648160
Deflection temperature, 264psi (°F)D 64890

Downloads

The property values listed in the PDF document(s) have been obtained using laboratory controlled test methods. They are offered without guarantee since conditions under which the product is used are beyond our control. Mold shrinkage is intended as a guide only, as specific shrinkage is affected by part design, mold design and molding conditions. Therefore, The Plastics Group disclaims any liability for loss or damage incurred in connection with the use of this product.

Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.
Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.