Your browser is out of date!

Update your browser to view this website correctly.

Update browser
Be sure to visit us at Booth W4943 at NPE2024 - See you there
Polifil® C
Polifil® RMC
Polifil® T
Polifil® RMT
Polifil® GFPP
Polifil® GFPPCC
Polifil® GFPPCC-WS
Polifil® GFRMPPCC
Polifil® BS
Polifil® RC
Polifil® GFABS
Polifil® GFPC
Polifil® GFN/MRN 6
Polifil® GFN/MRN 6/6
Polifil® Nylon 6
Polifil® Nylon 6/6
Polifil® RP-ABS
Polifil® RP-HDPE
Polifil® RP-HIPS
Polifil® RP-LDPE
Polifil® RP-PP
Polifil® TPO-60D12
Polifil® TPO-60D12UV
Polifil® TPOT-2024UV

Polifil® Nylon 6

Nylon 6 Resins

Polifil® NYLON 6 provides superior strength and rigidity with electrical resistance and surface lubricity. These properties have been proven to work in the following applications: automotive, housings, bearings as well as appliances. Standard processing techniques are applicable.
Use this information as a guide to aid you in selecting the proper...

Learn more
PhysicalASTM/
Method
Polifil®
930L
Polifil®
836L
Reinforcement content (%)TPG WI00
Specific gravityD 7921.131.09
Melt flow (g/10 min)D 1238n/an/a
Water absorption, 24 hours (%)D 5701.61.3
Mold shrinkage – 1/8″ specimen (in/in)D 9550.0120.012
Mechanical @ 73°F*ASTM/
Method
Polifil®
930L
Polifil®
836L
Tensile strength (psi)D 63811,5009,400
Elongation @ yield (%)D 63889
Elongation @ break (%)D 6384060
Tensile modulus (kpsi)D 638440360
Flexural modulus, tangent (kpsi)D 790390320
Flexural strength (psi)D 79015,00012,000
Izod impact, notched (ft-lbs/in)D 2561.12.5
Gardner impact, 1/2″ tup (in-lbs)D 542012100
Rockwell hardness (R-scale)D 785116108
* all properties tested dry as molded
ThermalASTM/
Method
Polifil®
930L
Polifil®
836L
Deflection temperature, 66psi (°F)D 648360300
Deflection temperature, 264psi (°F)D 648145140

Downloads

The property values listed in the PDF document(s) have been obtained using laboratory controlled test methods. They are offered without guarantee since conditions under which the product is used are beyond our control. Mold shrinkage is intended as a guide only, as specific shrinkage is affected by part design, mold design and molding conditions. Therefore, The Plastics Group disclaims any liability for loss or damage incurred in connection with the use of this product.

Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.
Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.