Your browser is out of date!

Update your browser to view this website correctly.

Update browser
Be sure to visit us at Booth W4943 at NPE2024 - See you there
Polifil® C
Polifil® RMC
Polifil® T
Polifil® RMT
Polifil® GFPP
Polifil® GFPPCC
Polifil® GFPPCC-WS
Polifil® GFRMPPCC
Polifil® BS
Polifil® RC
Polifil® GFABS
Polifil® GFPC
Polifil® GFN/MRN 6
Polifil® GFN/MRN 6/6
Polifil® Nylon 6
Polifil® Nylon 6/6
Polifil® RP-ABS
Polifil® RP-HDPE
Polifil® RP-HIPS
Polifil® RP-LDPE
Polifil® RP-PP
Polifil® TPO-60D12
Polifil® TPO-60D12UV
Polifil® TPOT-2024UV

Polifil® GFABS

Glass-Reinforced Acrylonitrile-Butadiene Styrene

Polifil® GFABS series compounds combine the most desirable properties of both components – allowing for enhanced processability and toughness together with the stiffness of glass. These compounds are used in firearms, automotive applications and household appliances. Standard processing techniques are applicable.
Use this information as a...

Learn more
PhysicalASTM/
Method
Polifil®
GFABS-10
Polifil®
GFABS-20
Polifil®
GFABS-30
Reinforcement content (%)TPG WI102030
Specific gravityD 7921.11.221.28
Melt flow 230/3.8 (g/10 min)D 12383-10*3-10*3-10*
Water absorption, 24 hours (%)D 5700.20.20.15
Mold shrinkage – 1/8″ specimen (in/in)D 9550.0030.0020.002
* melt flow may be specified
Mechanical @ 73°FASTM/
Method
Polifil®
GFABS-10
Polifil®
GFABS-20
Polifil®
GFABS-30
Tensile strength (psi)D 6389,50011,00013,000
Elongation @ yield (%)D 6382.02.02.0
Elongation @ break (%)D 6383.02.02.0
Tensile modulus (kpsi)D 638670900910
Flexural modulus, tangent (kpsi)D 790600800930
Flexural strength (psi)D 79014,80015,50016,800
Izod impact, notched (ft-lbs/in)D 2561.21.21.0
Gardner impact, 1/2″ tup (in-lbs)D 5420644
Rockwell hardness (R-scale)D 785105114118
ThermalASTM/
Method
Polifil®
GFABS-10
Polifil®
GFABS-20
Polifil®
GFABS-30
Deflection temperature, 66psi (°F)D 648210220225
Deflection temperature, 264psi (°F)D 648208210212

Downloads

The property values listed in the PDF document(s) have been obtained using laboratory controlled test methods. They are offered without guarantee since conditions under which the product is used are beyond our control. Mold shrinkage is intended as a guide only, as specific shrinkage is affected by part design, mold design and molding conditions. Therefore, The Plastics Group disclaims any liability for loss or damage incurred in connection with the use of this product.

Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.
Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.