|
 |
 |
|
Polifil® RP-PP
 Polifil® RP-PP reprocessed polypropylene has the highest stiffness of the commodity olefin resins, while retaining sufficient impact properties for many applications. Due to its low cost and low density, polypropylene use has been expanding rapidly, and common uses now include injection molded articles, fibers, packaging films, and extruded sheet and profiles. Polypropylene is widely used in injection molding for housewares, appliances, and automotive parts. High flow grades are spun into fibers, and molded into thin wall containers, cups, and lids. Moderate flow resins are common in general injection molding and cast films. High molecular weight, low flow grades are extruded into sheet and profiles, and blow molded into automotive parts and recreational goods.
Physical Property Data Sheets
Material Safety Data Sheets
Processing Guides
(Not Available)
Troubleshooting Guides
The property values listed in the PDF document(s) have been obtained using laboratory controlled test methods. They are offered without guarantee since conditions under which the product is used are beyond our control. Mold shrinkage is intended as a guide only, as specific shrinkage is affected by part design, mold design and molding conditions. Therefore, The Plastics Group disclaims any liability for loss or damage incurred in connection with the use of this product.
 |
|
Can't Open PDFs (Portable Document Format)?
Click the ICON to get the FREE Adobe Acrobat Reader. |
Return to Polifil® Reprocessed Resins
|
|
|
