Custom Compounders Since 1973

Polifil® TPO-60D12UV

Polifil TPO UV

Thermoplastic Polyolefin with UV Stabilization

Polifil® TPO-60D12UV is a UV stabilized injection molding grade of compounded TPO utilizing metallocine catalyst technology. This product is intended for applications requiring outstanding impact properties at both ambient and low temperatures needing UV stabilization. Typical applications include automotive bumper and fascia components, recreational vehicle cowls, and lawn and garden machinery guards.

Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations to meet your application requirements.

The property values listed in the PDF document(s) have been obtained using laboratory controlled test methods. They are offered without guarantee since conditions under which the product is used are beyond our control. Mold shrinkage is intended as a guide only, as specific shrinkage is affected by part design, mold design and molding conditions. Therefore, The Plastics Group disclaims any liability for loss or damage incurred in connection with the use of this product.

Specific gravity D 792 0.91
Melt flow 230/2.16 (g/10 min) D 1238 Nominal 12
Water absorption, 24 hours (%) D 570 nil
Mold shrinkage (%) TPG 1.8
Mechanical @ 73°F    
Tensile strength @ yield (MPa) D 638 19.1
Elongation @ break (%) D 638 >500
Flexural modulus, 1% secant (MPa) D 790 790
Izod impact, notched, 73°F (kJ/m²) D 256 54
Izod impact, notched, 0°F (kJ/m²) D 256 20
Gardner impact, 1/2" tup (J) D 5420 40 ductile failure
Hardness, shore (D-scale) D 955 60
Deflection temperature, 66psi (°C) D 648 74